======================================================================

Part I.   Acuview Software Agreement
Part II.  Release Notes

======================================================================

ACUVIEW END-USER AGREEMENT
VERSION 1.2

IMPORTANT-READ CAREFULLY: This Acuview End-User Agreement ("EULA") 
is a legal agreement between the end user (either an individual or 
a single entity) and Accuenergy Corporation for the SOFTWARE(s) 
identified above, which includes the User's Guide, any associated 
SOFTWARE components, any media, any printed materials other than 
the User's Guide, and any "online" or electronic documentation 
("SOFTWARE"). By installing, copying, or otherwise using the 
SOFTWARE, you agree to be bound by the terms of this EULA. If you 
do not agree to the terms of this EULA, installation or use of the 
SOFTWARE is prohibited. 

1. DEFINITIONS

"Non-commercial Entity" is defined as any individual, educational 
institution, charity or humanitarian organization.

"Commercial Entity" is defined as any corporation registered or 
otherwise that derives or attempts to derive substantial commercial 
and monetary gain and benefit from its efforts and endeavors. This 
includes all Government and Military entities.

"Agreement" means this document. This agreement is a legal and 
binding agreement between the end user (individual or a legal entity) 
and Accuenergy Corporation.

2. The SOFTWARE is not to be sold.

3. RESTRICTIONS

Reverse engineering, de-compiling, or disassembling the SOFTWARE is 
prohibited, except and only to the extent that such activity is 
expressly permitted by applicable law notwithstanding this limitation. 
Software may not be rented, leased, or loaned. Permanent transfer of 
all user rights is allowable under this EULA, provided the recipient 
agrees to the terms of this EULA. The SOFTWARE may not be used to 
perform any unauthorized transfer of information (e.g. transfer of 
files in violation of a copyright) or for any illegal purpose.

4. SUPPORT SERVICES

Accuenergy Corporation may provide support services related to the 
SOFTWARE. Use of Support Services is governed by Accuenergy 
Corporation polices and programs described in the user manual, in 
online documentation, and/or other materials provided by Accuenergy 
Corporation, as they may be modified from time to time. Any 
supplemental SOFTWARE code provided as part of the Support Services 
shall be considered part of the SOFTWARE and subject to the terms and 
conditions of this EULA. With respect to technical information users 
provide Accuenergy Corporation as part of the Support Services, 
Accuenergy Corporation may use such information for its business 
purposes, including for product support and development. Accuenergy 
Corporation will not utilize such technical information in a form 
that personally identifies a user.

5. TERMINATION

Without prejudice to any other rights, Accuenergy Corporation may 
terminate this EULA if a user fails to comply with the terms and 
conditions of this EULA.  In such event, the user must destroy all 
copies of the SOFTWARE.

6. COPYRIGHT

The SOFTWARE is protected by copyright laws and international treaty 
provisions. The user acknowledges that no title to the intellectual 
property in the SOFTWARE is transferred to the user. The user further 
acknowledges that title and full ownership rights to the SOFTWARE 
will remain the exclusive property of the Accuenergy Corporation and 
the user will not acquire any rights to the SOFTWARE except as 
expressly set forth in this agreement. The user agrees that any copies 
of the SOFTWARE will contain the same proprietary notices which appear 
on and in the SOFTWARE.

7. NO WARRANTIES

Accuenergy Corporation expressly disclaims any warranty for the 
SOFTWARE. THE SOFTWARE AND ANY RELATED DOCUMENTATION IS PROVIDED 
"AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, 
INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OR 
MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR 
NON-INFRINGEMENT. THE ENTIRE RISK ARISING OUT OF USE OR 
PERFORMANCE OF THE SOFTWARE REMAINS WITH THE USER.

8. LIMITATION OF LIABILITY

IN NO EVENT SHALL ACCUENERGY CORPORATION OR ITS SUPPLIERS BE LIABLE 
TO THE USER FOR ANY CONSEQUENTIAL, SPECIAL, INCIDENTAL, OR INDIRECT 
DAMAGES OF ANY KIND ARISING OUT OF THE DELIVERY, PERFORMANCE, OR USE 
OF THE SOFTWARE, EVEN IF ACCUENERGY CORPORATION HAS BEEN ADVISED OF 
THE POSSIBILITY OF SUCH DAMAGES.  

9. MISCELLANEOUS

Should you have any questions concerning this EULA, or if you desire 
to contact Accuenergy Corporation for any reason, please visit our 
Web site at: http://www.accuenergy.com. 



======================================================================

Release Notes


Acuview v3.6.7 What's New
------------------------------

1. Support the newest AcuRev 2110 meter.


Acuview v3.6.6 What's New
------------------------------

1. Modify the wireless temperature measurement module of Acuvim II V4.


Acuview v3.6.5 What's New
------------------------------

1. Bug fixed: AcuRev 2110: System Event Log page error.
2. Bug fixed: AcuRev 2110: Incorrect modification of energy value.
3. Support the newest AcuRev 2110 meter.


Acuview v3.6.4 What's New
------------------------------

1. Support Acuvim II V4 meter.
2. Bug fixed: About alternative weekends setting of Acuvim II TOU.


Acuview v3.6.3 What's New
------------------------------

1. Support AcuRev 2110 meter.


Acuview v3.6.2 What's New
------------------------------

1. Support the AI of AcuDC 240.


Acuview v3.6.1 What's New
------------------------------

1. Bug fixed: The voltage waveform coefficient of Acuvim II is incorrect.


Acuview v3.6 What's New
------------------------------

1. Support the newest Acuvim II meters (v3.66 above).
2. Support the newest AcuRev 2000 meters (v2.01 above).


Acuview v3.5.6 What's New
------------------------------

1. Support Acuvim-L V3.XX control relay.


Acuview v3.5.5 What's New
------------------------------

1. Bug fixed: Fixed the problem of losing a record every few minutes 
   when logging data in minutes. (for all meters)


Acuview v3.5.4 What's New
------------------------------

1. Support the newest Acuvim II meters (v3.53 above).
2. Support the newest AcuDC 240 meters (v2.11 above).


Acuview v3.5.3 What's New
------------------------------

1. Support Acuvim-L V3.XX access 6.68mA transformer.
2. Support alternative weekends setting of Acuvim II TOU.


Acuview v3.5.2 What's New
------------------------------

1. Rename the I4 of Acuvim-L V3.XX to IN.


Acuview v3.5 What's New
------------------------------

1. Bug fixed: Acuvim II cannot display 32nd~63rd harmonic graph.
2. Bug fixed: Acuvim II cannot log phase angles.
3. Support the newest Acuvim-CL/DL/EL/KL meters (v3.01 above).
4. AxLink.exe can run alone.


Acuview v3.4.11 What's New
------------------------------

1. Added an option for logging item of "Harmonics (THD)".
2. Support the MESH module for Acuvim II.


Acuview v3.4.10 What's New
------------------------------

1. Bug fixed: A problem about Acuvim IIR onboard data logging.
2. Added an option for no windows to refresh when data logging.


Acuview v3.4.9 What's New
------------------------------

1. Achieved a real one second data logging.
2. Several bugs fixed.


Acuview v3.4.7 What's New
------------------------------

1. Bug fixed: New Acuvim II cannot display 63rd harmonic.
2. Bug fixed: Acuvim IIW Cannot display right waveform graph in some 
   region or country.
3. Improved the success rate of communication.
4. Added a command line parameter "/L", data logging begins 
   automatically after the program starts 30 seconds.


Acuview v3.4.6 What's New
------------------------------

1. Bug fixed: A problem about Acuvim IIR onboard data logging.


Acuview v3.4.5 What's New
------------------------------

1. Bug fixed: A problem about Acuvim-EL phase energy.
2. Enhanced reading Acuvim IIR/AcuDC 240 onboard data logging.
3. Added a small tool to calculate pulse constant.
4. Added data logging function for the new Acuvim II phase energy.


Acuview v3.4.4 What's New
------------------------------

1. Bug fixed: A problem about Phasor Diagram.


Acuview v3.4.3 What's New
------------------------------

1. Bug fixed: A problem about Acuvim IIR onboard data logging.


Acuview v3.4.2 What's New
------------------------------

1. Added data logging function for DI state.
2. Enhanced reading Acuvim IIR onboard data logging.


Acuview v3.4.1 What's New
------------------------------

1. Support the newest AcuDC 240 meters (v2.01 above).


Acuview v3.4 What's New
------------------------------

1. Support the newest Acuvim II/IIR/IIE/IIW meters (v3.01 above).
2. Support the newest Acuvim-CL/DL/EL/KL meters (v2.01 above).
3. Enhanced adding device function.
4. Several bugs fixed.


Acuview v3.3.1 What's New
------------------------------

1. Several bugs fixed.


Acuview v3.3 What's New
------------------------------

1. Support the newest AcuDC 220 and AcuDC 240 meters.
2. Several bugs fixed.


Acuview v3.2 What's New
------------------------------

1. Bug fixed: A problem about some deviation in the data logging time 
   under Windows 7.
2. Support the newest Acuvim IIW meters.


Acuview v3.1.2 What's New
------------------------------

1. Support Acuvim II V2.10 version. 
   (Now you can set up webpage parameters via the MODBUS-TCP.)
2. Several bugs fixed.


Acuview v3.1.1 What's New
------------------------------

1. Bug fixed: A problem about importing and updating EL/KL/IIR/IIE 
   device settings.


Acuview v3.1 What's New
------------------------------

1. Bug fixed: Can not modify the device properties.
2. Added the data log option "Energy (TOU)".
3. Added a device management feature that displays the detailed 
   communication status.
4. Added an auto-correction device clock feature.
5. Enhanced third-party developers to use the data file.


Acuview v3.0 What's New
------------------------------

1. Added exporting TOU and Max/Min features.
2. Modify the Data Log Settings dialog.
3. Rewrite the data logging function code, and support for data logging 
   frequency of less than 1 minute features, and change in days to 
   separate data files.
4. A number of bugs fixed.


Acuview v2.9 What's New
------------------------------

1. Added the Pulse Presentation and Analog Presentation features.


Acuview v2.8 What's New
------------------------------

1. Support the newest Acuvim-KL meters.
2. Added advanced option configuration.
3. Adjusted the software restriction.
4. A number of bugs fixed.


Acuview v2.7 What's New
------------------------------

1. Bug fixed: When you try to connect to a nonexistent connection, 
   the program gets stuck in a "frozen" state.
2. Added the Data Log 1/2/3 function of Acuvim IIR.
3. Support the newest Acuvim IIE meters.
4. Added the data log option "Phase Angles".


Acuview v2.6.1 What's New
------------------------------

1. Support the newest Acuvim IIR meters, except Data Log 1/2/3.
2. Added the data log option "DI Counter".


Acuview v2.6 What's New
------------------------------

1. Support the newest Acuvim-DL and Acuvim-EL meters.
2. Changed the display style of the page.


Acuview v2.5 What's New
------------------------------

1. Support for data summary table function.


Acuview v2.4.2 What's New
------------------------------

1. Support for running multiple instances function.


Acuview v2.4.1 What's New
------------------------------

1. Bug fixed: A problem about the Connection Settings.
2. Bug fixed: A problem about the Current Demand of Acuvim II.
3. Added an "EOF" line at the end of the data log file.
4. Support the newest Acuvim II meters.


Acuview v2.4 What's New
------------------------------

1. Added the function changing text font size.


Acuview v2.3.2 What's New
------------------------------

1. Bug fixed: Cannot control Relays of Acuvim II.


Acuview v2.3.1 What's New
------------------------------

1. Bug fixed: Alarm Setpoint of Acuvim II appears blank.
2. Bug fixed: Sometimes Log file duration setting is incorrect.


Acuview v2.3 What's New
------------------------------

1. Bug fixed: The program start-up time is too long.
2. In the network connection, ask for meter password every time when 
   user wants to change parameters and reset/change Energy values now.
3. Enhanced data log options for each device.
4. Option to save log as xls/txt/csv file.
5. A number of other changes.


Acuview v2.2.1 What's New
------------------------------

1. Bug fixed: Cannot connect to meter using Ethernet.
2. Bug fixed: When you restore a device window, the device window shows 
   a blank screen.


Acuview v2.2 What's New
------------------------------

1. Support the newest Acuvim-L meters.
2. Support the newest Acuvim II meters.
3. Able to identify an unknown device.


Acuview v2.1 What's New
------------------------------

1. Change the window style to be scalable.
2. Added the automatic distribution of multi-window function.
3. A number of other changes.


Acuview v2.0 What's New
------------------------------

1. Bug fixed: When you add the 9th Acuvim-X device, system error appears.
2. Bug fixed: Excel file format is not commonly used.
3. A number of other changes and bug fixed.
4. Support Acuvim series meters.
5. Support multi-COM and multi-IP configuration function.
6. Support multi-window refresh function.


Acuview v1.4 What's New
------------------------------

1. Some small changes.


Acuview v1.3 What's New
------------------------------

1. Bug fixed: When you add the 9th Acuvim-X device, system error appears.
2. Bug fixed: No demand data logging.
3. Changed license mode.
4. Support Acuvim II meters.
5. Support MODBUS TCP/IP communication mode.


Acuview v1.2 What's New
------------------------------

1. When you rest on Settings > General page, the background monitoring
   not works. This has been corrected.
2. Dynamic calculation of available monitoring meters.
3. Automatically opening a new data file when the data file is full.
4. Enhanced dealing with communication errors.
5. Support Acuvim-L series meters.


Acuview v1.1 What's New
------------------------------

1. In Readings > System Status page, the values of Newest Record No. 
   are incorrect. This has been corrected.
2. In Readings > Harmonics > THD page, the names of Voltages are 
   incorrect. This has been corrected.
3. In data logging files, the sequence of parameters in first row is 
   incorrect. This has been corrected.


Acuview v1.0 Features
------------------------------

1. Monitoring and setting Acuvim-X series meters
2. Connection with more than one meter
3. Background monitoring function
4. Export or import device profiles



======================================================================
Copyright 2006-2019 Accuenergy Corporation
All rights reserved.

